The RevPi AIO module has many different connections. Here you can find out what these are and what you can use them for.
RevPi AIO module has 3 status LEDs. They indicate different statuses of the RevPi AIO. Please check this table for further information.
|Analog in- and outputs
RevPi AIO module features:
Please check the pinout diagram.
Only connect up to the power supply after you have plugged in all the connections and your device is mounted on the DIN rail. Modules that are already connected via the PiBridge must always be supplied with power at the same time. Double-check the polarity of the power supply connections of all modules before switching on! You can operate RevPi devices in a voltage range from 12V to 24V. For more information on how to connect your RevPi AIO, please refer to the chapter “Connecting the power supply“.
PiBridge connectors enable you to enhance your RevPi system. Connect two modules by plugging the PiBridge plug into the PiBridge connectors of each module.
Lock your module on the DIN rail securely with the locking bracket.