Notes and Symbols Used #
Safety instructions vary according to the severity of the hazard.
|
Warning
|
Possible danger to life
Indicates a general imminent danger to persons which may result in death or serious injury. |
|
Important
|
Property damage possible
Indicates a possible danger to property that may result in property damage and/or data loss. |
|
Note
|
Additional supporting or important information, but not relevant for security. |
Symbols Used
|
Ground (GND) |
|
Functional earth (FE) |
|
Disposal instructions, see Dismantling and Disposal |
Intended Use #
The RevPi is an industrial device and was developed for use in a control cabinet. The device can only function properly and safely if:
-
the information in the technical data sheet and in this documentation is observed.
-
only qualified personnel work on the device.
-
personal safety does not depend on the function of the device.
-
the appliance is not used in potentially explosive atmospheres.
-
the device is connected to an approved power supply.
-
only approved cabling and accessories are used.
-
the device is only used indoors.
-
the device does not come into contact with aggressive media such as chemicals or oil, etc.
-
the device is not subsequently processed.
-
the degree of protection and protection class of the switch cabinet comply with the standards intended for the application.
-
all local safety regulations are observed.
-
all safety instructions are observed.
Safety Instructions #
The RevPi was developed for use in a control cabinet. Observe the specifications for the intended use.
|
Warning
|
Danger to life due to electrical shock
There is a risk of fatal electrical shock when working on devices in the switch cabinet with 230 V mains voltage. ▷ Operations in the switch cabinet may only be carried out by qualified electricians. ▷ Before carrying out any operations in the switch cabinet, switch off the power supply properly. |
|
Important
|
Damage to the device due to overheating
The ambient temperature in the switch cabinet must not exceed the maximum permissible operating temperature. ▷ Keep ventilation slots clear. ▷ Observe the installation clearances. ▷ Mount the device in the intended orientation. ▷ Do not place appliances with high input power directly next to each other. ▷ Regularly remove dust and dirt from the area around the appliance. |
|
Important
|
Damage to the device due to impermissible power supply
▷ Observe the maximum voltage supply of 28.8 V DC. ▷ Only use the supplied plug and a suitable power supply unit. ▷ Ensure correct polarity when connecting. ▷ Ensure a stable power supply. |
Dismantling and Disposal #
|
Warning
|
Danger to life due to electrical shock
There is a risk of fatal electrical shock when working on devices in the switch cabinet with 230 V mains voltage. ▷ Operations in the switch cabinet may only be carried out by qualified electricians. ▷ Before carrying out any operations in the switch cabinet, switch off the power supply properly. |
You require:
✓ A small slotted screwdriver
▷ Make sure that all devices are disconnected from their respective power supplies.
▷ Remove all shot devices.
▷ If necessary, remove the plug connectors on the top of the housing.
▷ Use the slotted screwdriver to loosen the locking clips on the back of the RevPi.
Waste disposal
|
Note
|
Some RevPi devices are supplied with an integrated lithium battery. This battery has a guaranteed service life of 10 years. The lithium battery cannot be replaced by the customer. In this case, please contact customer service at: support@kunbus.com. |
▷ Dispose of the device in accordance with the locally applicable regulations for waste electronic equipment.
