RevPi Connect and RevPi Connect 4 have six status LEDs.
The assignment of the LEDs differs between the devices. Each LED is marked with a name.
RevPi Connect
|
LED |
Signal |
Meaning |
|---|---|---|
PWR (Power) |
green | The device is ready for operation. |
| red | An error has occurred. Check if all cables are plugged in correctly. | |
WD (Watchdog) |
green | All system components are working. |
| flashes once, red | The watchdog has detected an error and restarted the system. | |
REL (Relais) |
off | Contact open. |
| green | Contact closed. | |
| A1 … A3 | Freely assignable, see Status Bytes on the RevPi. Can be controlled with status bytes, see How to Use Status Bytes. |
|
RevPi Connect 4
|
LED |
Signal |
Meaning |
|---|---|---|
PWR (Power) |
green | The device is ready for operation. |
| rot | An error has occurred. Check if all cables are plugged in correctly. | |
| A1 … A5 | Freely assignable, see Status Bytes on the RevPi. Can be controlled with status bytes, see How to Use Status Bytes. |
|