CODESYS Software
- CODESYS Development System V 3.5.20.0 or higher
- CODESYS Control Linux ARM 32/64 Bit V4.11.0.0 or higher
RevPi Software
- RevPi OS Bullseye 32/64 bit (04/2024) or higher
- Revolution Pi Library for CODESYS V2.0.0.0 or higher
NOTE
If you are not sure which version of the RevPi OS is installed on your RevPi device, you can retrieve this from the terminal of the RevPi device using the command cat /etc/revpi/os-release.
If a version of the RevPi OS Bullseye is installed, you can update it free of charge using the commands sudo apt-get update and sudo apt-get upgrade.
If an older version (e.g. Buster or Stretch) is installed, install the latest version of the RevPi OS onto your RevPi device. You can download it free of charge from the Revolution Pi download area.
RevPi Devices
The following RevPi devices are compatible with the mentioned software and can be used with CODESYS:
- RevPi Core S/SE
- RevPi Connect S/SE
- RevPi Connect 4
- RevPi Flat S