Digital I/O Modules
Expand your RevPi Connect and RevPi Core with digital inputs and outputs. You can operate the digital RevPi I/O modules with 24 V or 12 V – depending on what best suits your application.
RevPi DIO
Digital input and output module with 14 digital inputs and 14 digital outputs that you can configure flexibly.
You can use the inputs as a digital input, counter input or encoder – the outputs as a switching signal or PWM signal.
RevPi DO
Digital output module with 16 digital outputs, which you can configure flexibly as a switching signal or PWM signal.
RevPi DI
Digital input module with 16 digital inputs, which you can configure as a digital input, counter input, or encoder.
Versatile Applications
Digital I/O modules open up numerous possibilities to expand the capabilities of your RevPi Connect or RevPi Core:
- Read out digital sensors – from proximity switches to water meters with reed contacts
- Record inputs from control panels and push buttons
- Measure speeds with sensors
- Switch relays for circuits, valves and motors
- Control LED displays and signal towers
Analog and Digital I/O Modules
Multi I/O Module
RevPi MIO
The RevPi MIO combines analog and digital signal processing in a single module:
- 8 analog inputs
- 8 analog outputs
- 4 flexible digital channels
You can configure the digital channels as inputs or outputs according to your requirements. With the RevPi MIO, you can master various automation tasks:
- Precisely capture sensor data
- Control and monitor processes
- Process digital and analog signals simultaneously
Analog Input and Output Module
RevPi AIO
The RevPi AIO extends your RevPi Core and RevPi Connect with 2 analog inputs, 2 analog outputs, and 2 RTD temperature inputs.
Use the two analog outputs for example to precisely control frequency inverters and proportional valves. They support the following signals:
- Voltage: 0–5 V, 0–10 V, ±5 V, ±10 V, 0–5.5 V, 0–11 V, ±5.5 V, ±11 V
- Current: 0–20 mA, 0–24 mA, 4–20 mA
With the two analog inputs, you can reliably measure quantities like distances, pressures, and flow rates. They support the following signals:
- Voltage: 0–5 V, 0–10 V, ±5 V, ±10 V
- Current: 0–20 mA, 0–24 mA, 4–20 mA, ±25 mA
The two RTD temperature inputs enable precise temperature measurements in industrial applications. You can use Pt100/Pt1000 resistance temperature sensors with 2-, 3-, or 4-wire connections.
Relais Output Expansion Module
Relay Output Module
RevPi RO
The RevPi RO extends your RevPi Core and RevPi Connect with four potential-free relay outputs. Each relay switches loads up to 5 A at 250 V AC or 30 V DC. Use the relay outputs for example to:
- Switch loads like heaters, pumps, and fans
- Galvanic isolation of control signals as a dry contact