I want to use one RevPi Connect as a Profinet master and another one as Profinet Slave. The master has eth0 static ip: 192.168.0.100/24, eth1 static ip: 192.168.0.101/24. While the slave has eth0 static ip: 192.168.0.1/24, eth1 static ip: 192.168.0.2/24. There is an eth cable connected between master eth1 port and slave eth1 port.
if I connect PC to the master eth0 port. The ping to the master eth1 port is successful. However ping to slave eth1 port failed.
if I connect PC to the slave eth0 port. The ping to the slave eth1 port is successful. However ping to master eth1 port failed.
How can I make it possible to access slave eth1 port via master eth0 port and vice versa?
Thank you for your help.