Can't set fixed ip address

Topics about the Software of Revolution Pi
Post Reply
thalesmaoa
Posts: 16
Joined: 19 Jul 2022, 20:47
Answers: 0

Can't set fixed ip address

Post by thalesmaoa »

I can't understand why my configuration doesn't work for RevPi, but it does work for a normal RaspPi.

Code: Select all

pi@RevPi1118:~ $ cat /etc/dhcpcd.conf 
# A sample configuration for dhcpcd.
# See dhcpcd.conf(5) for details.

# Allow users of this group to interact with dhcpcd via the control socket.
#controlgroup wheel

# Inform the DHCP server of our hostname for DDNS.
hostname

# Use the hardware address of the interface for the Client ID.
clientid
# or
# Use the same DUID + IAID as set in DHCPv6 for DHCPv4 ClientID as per RFC4361.
# Some non-RFC compliant DHCP servers do not reply with this set.
# In this case, comment out duid and enable clientid above.
#duid

# Persist interface configuration when dhcpcd exits.
persistent

# Rapid commit support.
# Safe to enable by default because it requires the equivalent option set
# on the server to actually work.
option rapid_commit

ipv4only
# A list of options to request from the DHCP server.
option domain_name_servers, domain_name, domain_search, host_name
option classless_static_routes
# Respect the network MTU. This is applied to DHCP routes.
option interface_mtu

# Most distributions have NTP support.
#option ntp_servers

# A ServerID is required by RFC2131.
require dhcp_server_identifier

# Generate SLAAC address using the Hardware Address of the interface
#slaac hwaddr
# OR generate Stable Private IPv6 Addresses based from the DUID
slaac private

# Example static IP configuration:
#denyinterfaces eth0 wlan1

interface eth0
	static ip_address=10.1.1.253/24
        static routers=10.1.1.254
	static domain_name_servers=10.1.1.254
#denyinterfaces eth0 wlan1
#static ip6_address=fd51:42f8:caae:d92e::ff/64
#static routers=192.168.0.1
#static domain_name_servers=192.168.0.1 8.8.8.8 fd51:42f8:caae:d92e::1

# It is possible to fall back to a static IP if DHCP fails:
# define static profile
#profile static_eth0
#static ip_address=192.168.1.23/24
#static routers=192.168.1.1
#static domain_name_servers=192.168.1.1

# fallback to static profile on eth0
#interface eth0
#fallback static_eth0

# Prioritize wlan0 routes over eth0 routes.
interface wlan0
        metric 100
	env ifwireless=1
	env wpa_supplicant_driver=8188eu,wext

interface wlan1
	nohook wpa_supplicant
	static ip_address=10.1.1.254/24
        static routers=10.1.1.254
        static domain_name_servers=10.1.1.254


denyinterfaces eth0 wlan1
pi@RevPi1118:~ $ ifconfig 
eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether b8:27:eb:39:14:2e  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 36  bytes 1996 (1.9 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 36  bytes 1996 (1.9 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wg0: flags=209<UP,POINTOPOINT,RUNNING,NOARP>  mtu 1420
        inet 10.69.72.1  netmask 255.255.255.0  destination 10.69.72.1
        inet6 fd11:5ee:bad:c0de::1  prefixlen 64  scopeid 0x0<global>
        unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  txqueuelen 1000  (UNSPEC)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.200.61  netmask 255.255.255.0  broadcast 192.168.200.255
        ether c0:06:c3:d1:6f:fb  txqueuelen 1000  (Ethernet)
        RX packets 935  bytes 169879 (165.8 KiB)
        RX errors 0  dropped 23  overruns 0  frame 0
        TX packets 151  bytes 24403 (23.8 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wlan1: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether 28:ee:52:0a:7c:37  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

pi@RevPi1118:~ $ cat /etc/os-release 
PRETTY_NAME="Raspbian GNU/Linux 10 (buster)"
NAME="Raspbian GNU/Linux"
VERSION_ID="10"
VERSION="10 (buster)"
VERSION_CODENAME=buster
ID=raspbian
ID_LIKE=debian
HOME_URL="http://www.raspbian.org/"
SUPPORT_URL="http://www.raspbian.org/RaspbianForums"
BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"
thalesmaoa
Posts: 16
Joined: 19 Jul 2022, 20:47
Answers: 0

Re: Can't set fixed ip address

Post by thalesmaoa »

Now I get it! wlan must associate first before dhcp issue an ip. I was trying to achieve that backwards.
Post Reply