Hello,
There is the second link again https://kunbus-gmbh.atlassian.net/servi ... 2843508848.
We have some tutorials about GW PROFINET IRT but with CODESYS
see here.

Best Regards

Ulrich Kouatang Biakoup | Technical Support

Hello Yongchaow,

please have a look the Codesys checklist.
What do you means with "serial coms". Do you get an error message when you try to connect to the unit?

Best Regards

Ulrich Kouatang Biakoup | Technical Support

Hello Becs, step7 and TIA-portal are not supported by us. Our Basic devices can communicate with other Profinet devices and for this you need a modular device. For your case, a modular gateway PROFINET IRT would be suitable. To find out how our RevPi base module works with the modular gateway, just ...

Hello Flk,
it is not possible to trigger any kind of customized diagnosis alarm using the Profinet IRT gateway module. It's also not possible to make any change to the GSDML File.

Hallo Markus91, ich sehe hier eine mathematische Probleme. Aber bin ich mir nicht sicher. Wenn ich mir die Charakteristiken von dem Sensor anschaue, kann ich diesen Sensor als linear beeurteilen. Es spricht, dass den Ausgang antwortet auf y= a x+b. a und b sind jetzt zu bestimmen. Wir nehmen an 1V -...

Hello MaltarLED,

The license cannot be 100% the cause of the problem. I wanted to remind you that we do not support "CODESYS Control for Raspberry Pi SL".

Best Regards

Ulrich Kouatang Biakoup | Technical Support

Hello MaltarLED, Your controllers are licensed with 'CODESYS Control for Raspberry Pi SL'. Please note that: 'CODESYS Control for Raspberry Pi SL' is for non-commercial use. For the Revolution Pi, you need "CODESYS Control for Raspberry Pi MC SL". To have a suitable setup using Codesys and...

Hallo Markus,

Ich habe ein wunderbares Tutorial für dich. Das kann dir für deine Applikation helfen.
Schau dich einfach hier.

Melde dich einfach für weitere Fragen.

Viele grüße

Ulrich Kouatang Biakoup | Technischer Support

Hello Oernil90, please have a look at this tutorial https://kunbus-gmbh.atlassian.net/servicedesk/customer/portal/1/article/2201518090 Note: The image created for the RevPi Core is not compatible with the RevPi Core 3+ due to differences in hardware or firmware. To resolve this issue, you may need t...

Hi EduardoH,

We have many distributors across the world. Have a look https://www.kunbus.com/distributors-worldwide and select the distributors, which is near to you.
Unfortunately, we haven't any tutorial referred to your Application.

Best Regards

Ulrich Kouatang Biakoup | Technical Support