Hallo Michael,
kannst du uns einen SOS-Report schicken?
https://kunbus-gmbh.atlassian.net/servi ... 2036400208


Danke

Hello tsm can you send an SOS report?
https://kunbus-gmbh.atlassian.net/servi ... 2036400208

Hi RedP, It's strange but maybe the easiest way to get quick access is to reload the image, then you can log in with the default credentials you mentoned ...
https://revolutionpi.com/en/support/downloads#c1069

Hello Wolle, so I have made a litle wiring setup which is the part that is connected to the RevPi AIO Module:

chrome_qp7BWYRLaB.png

The other PINs of the bluesen are then connected in this way:

PIN 1 & PIN 2 - 24V
PIN 8 & PIN 11 - GND


The inputs of the AIO module on the front side are ...

Hallo Matthias,
kannst du uns einen SOS-Report zukommen lassen?

Hallo Mattse122 ich nutze für Screenshots dieses Tool: https://getsharex.com/ dann kannst du z.B. solche Dinge unkompliziert erledigen und anhängen hier wie ein PNG:

Hello Marc, thank you for your detailed description of the error. Which image are you using? Can you post the output from your system?

pi@RevPi57688:~$ ls -la /dev/ttyRS485
lrwxrwxrwx 1 root root 7 Feb 27 15:50 /dev/ttyRS485 -> ttyUSB0
pi@RevPi57688:~$ cat /etc/revpi/image-release
250124-revpi ...

Hallo Mattse122, gibt es einen Grund warum du noch Bullseye verwendest? Das Problem das du beschreibst deutet darauf hin, dass PiCtory entweder hier neuer ist als kompatibel mit dem alten Bullseye oder andere Dinge im System nicht passen. Kannst du einen Screenshot erstellen vom PiCtory Fehlerbild?

Hello Wolle, first of all, thank you for the detailed description of the problem. I have understood that the error only occurs with one of the two AIO modules, is that correct?
So when measuring the current, the load resistance must be taken into account. If it becomes too high, the current source ...

Hi palmhoej that's an interesting question and you can see the versatility of the Revolution Pi in practical everyday life.

I have created a test setup for this with USB-RS485 to RS485. With the help of two wires, which function for the transmission via RS485, you can already see here how easy it ...