Raspberry Pi 4 uses a dedicated XHCI controller. The RevPi (all but Connect 4) use the integrated host controller. One thing you could try, is to enable the xhci mode of the internal host controller (usb2 only). In order to do so, you have to agg otg_mode=1 at the end of /boot/config.txt. Please not...

Hi,

Welcome to the Revolution Pi community!
How do you query the values?

Nicolai

Hallo, du kannst beide Dienste stoppen sofern du sie nicht verwendest. Den Teamviewer kannst du sogar deinstallieren. Beim Cups bin ich mir nicht sicher ob ggf. anderes Pakete aus dem grafischen Subsystem Abhängigkeiten darauf haben. Ggf. mal ausprobieren. Um die Dienste dauerhaft zu stoppen kannst ...

Yes, your assumption is right.

Nicolai

With the final release you will be able to perform a in place upgrade ( as long you have enough free disk space on the eMMC).

Nicolai

Liebe Community, wir freuen uns, die Beta-Version unseres Revolution Pi Bullseye-Images anzukündigen, welches eine Vielzahl neuer Funktionen und Verbesserungen für unsere beliebte Automatisierungsplattform mit sich bringt. Hier sind einige der wichtigsten Neuerungen: ARM64-Unterstützung: Unsere Imag...

Dear community, We are excited to announce the beta release of our Revolution Pi Bullseye image, which brings a host of new features and improvements to our popular automation platform. Here are some of the key highlights: ARM64 support: Our images now support the ARM64 architecture, which means imp...

Your DIO is missing the wires on X2 which powers the input and output section. You can wire it to the same source as the module power connector (X4).

Nicolai

The MAC address is set in /boot/config.txt with dtparam. You can have a look at the factory reset script in order to see how the MAC is set.

Nicolai

Hi Tomaz, no, unfortunately we do not have buildroot. The buildroot stuff over at raspberry pi (see their GitHub) might be a good starting point. Depending on your use case this might be sufficient. If you want to use our IO modules in your buildroot project you need to add our kernel (patches + piC...