Search found 47 matches

by in06khattab
15 Jul 2024, 18:29
Forum: Hardware
Topic: Ethernet ports do not light up after router restart
Replies: 7
Views: 1446

Re: Ethernet ports do not light up after router restart

Hi Dirk,

Attached is the SOS report before and after the router restart and the wireshark capture.
SOS reports and Wireshark capture - ETH0.zip
(89.92 KiB) Downloaded 20 times
Kind regards,
Ahmad
by in06khattab
10 Jul 2024, 14:17
Forum: Hardware
Topic: Ethernet ports do not light up after router restart
Replies: 7
Views: 1446

Re: Ethernet ports do not light up after router restart

Thank you Dirk I removed the link local and the issue still appears when I am connected to eth1. The network disconnects when the router reboots and the lights on the ethernet port do not light up any more. This does not happen on eth0. 2024-07-10_13-16.png I tried this test with a fresh bullseye im...
by in06khattab
04 Jul 2024, 21:35
Forum: Hardware
Topic: Ethernet ports do not light up after router restart
Replies: 7
Views: 1446

Re: Ethernet ports do not light up after router restart

Hi Derk,

Thank you for replying. Do you mean removing the eth0 connection?
by in06khattab
03 Jul 2024, 23:10
Forum: Hardware
Topic: Ethernet ports do not light up after router restart
Replies: 7
Views: 1446

Ethernet ports do not light up after router restart

Hi, When the router restarts, the Revpi Connect 4 looses connection. The lights on the ethernet port turn off on Port B (eth1). This does not happen on eth0. I tried the same thing on an older Revpi Connect and I do not notice this problem. I noticed there was a difference between eth0 and eth1 here...
by in06khattab
20 May 2024, 18:22
Forum: Hardware
Topic: piControl: AIO addr 31: communication failed (req:20,ret:-5)
Replies: 24
Views: 9580

Re: piControl: AIO addr 31: communication failed (req:20,ret:-5)

Hi,

Unfortunately, this energy meter only supports up to 9600 baud, so the modbus speed will have to remain at 9600 for now.
https://cdn.shopify.com/s/files/1/0558/ ... 1659968927
by in06khattab
16 May 2024, 19:59
Forum: Hardware
Topic: piControl: AIO addr 31: communication failed (req:20,ret:-5)
Replies: 24
Views: 9580

Re: piControl: AIO addr 31: communication failed (req:20,ret:-5)

Thank you very much for investigating. That is very helpful. I will have a look at the devices connected and see if they can all be changed.
by in06khattab
07 May 2024, 23:40
Forum: Hardware
Topic: piControl: AIO addr 31: communication failed (req:20,ret:-5)
Replies: 24
Views: 9580

Re: piControl: AIO addr 31: communication failed (req:20,ret:-5)

I have noticed that when there are too many warnings, I can no longer read updated Analog inputs. I keep getting an old value returned.
I will be reverting back to the old kernel in the short term

Code: Select all

sudo apt install raspberrypi-kernel=1:9.20230926+1-5.10.152-1+revpi11+1
by in06khattab
07 May 2024, 21:46
Forum: Hardware
Topic: piControl: AIO addr 31: communication failed (req:20,ret:-5)
Replies: 24
Views: 9580

Re: piControl: AIO addr 31: communication failed (req:20,ret:-5)

Thank you for your suggestion.
I am still getting errors after removing those entries.
by in06khattab
05 May 2024, 13:29
Forum: Hardware
Topic: piControl: AIO addr 31: communication failed (req:20,ret:-5)
Replies: 24
Views: 9580

Re: piControl: AIO addr 31: communication failed (req:20,ret:-5)

I think I found another bug in Pictory. When I changed the parity from even to none, saved the project and restarted the driver using the GUI. I then restarted the pi. After opening Pictory again, I noticed the following boxes missing numbers. Screenshot_13.jpg All the text boxes that are missing ha...
by in06khattab
05 May 2024, 13:06
Forum: Hardware
Topic: piControl: AIO addr 31: communication failed (req:20,ret:-5)
Replies: 24
Views: 9580

Re: piControl: AIO addr 31: communication failed (req:20,ret:-5)

I think I have figured out the source of the issue. When I delete all rows from Modbus Extended data, the errors go away from journalctl. When I add the rows back in, the errors come back. I tried a brand new Pictory project and as soon as I add all the rows, the errors appear. Screenshot_12.jpg Her...