Hey Webber,

back home I did some more testing an noticed that I made a mistake in mapping the IOs. Now everything works fine and I was able to translate it to FUP. The LEDs are still having their party but I will figure that out too.
Thanks alot again!

Siggi

Hey Webber,
thanks again for your selfless support!
Unfortunately your hints did not help me. I tried to test it your way but no luck so fare. Connecting a Input to power while being connected and running is not followed by any change of input state. To test this in the way you suggested I created a ...

Hey Webber,
thank you very much for posting your solution! I'm still struggeling with my issue an I have a hard time figuring out how one can configure the word/byte access. Coul someone give me a hint?
Thanks allot!
Siggi

Hallo,
der hier beschrieben Fall scheint mir sehr ähnlich zu meinem Problem zu sein.
Hab es im englischen Forum beschrieben https://revolutionpi.com/forum/viewtopic.php?t=4161
Hat hier vielleicht jemand eine idee was ich noch machen kann außer mich an die Checkliste zu halten?
Kann mir jemand ...

Hallo again,
I did disable the GPIOs_A_B in CODESYS but still have the same problem. To get a clean system I flased the RevPi onece again, configured everythig, but after the first run I'm back in the same situation. Funny colored LEDS and the same Errors as posted yesterday.
Before I connected to ...

Found it. Test in progress..
viewtopic.php?f=6&t=3023#p10839

Hi Stefan,
thank you very much for the quick response.
I pretty much did everything like it is describe in all the mentioned places.
What I don't know how to is your first point. Where and how do I deactivate the GPIOs (GPIO_A_B)?
Thanks again.
Siggi

Hallo,
I'm having some issues with my Connect 4 and the extension module DIO. For setup I followed this:
https://kunbus-gmbh.atlassian.net/servicedesk/customer/portal/1/article/2687893508 and
https://revolutionpi.com/forum/viewtopic.php?t=4007
and configured the hardware with Pictory ...