Hello Dirk,

Thanks for the article.

Best Regards,
Mani

Hi,
In My Project , I am using RevPi connect + [32GB].
I have Node-red and Codesys running in my hardware.
The response of the TOP command is contradictory between the available RAM and the individual Application RAM consumption.

TOP_CMD_RAM_Individual_applicaion_MEM%.png

In the Above image, the ...

Hello Kees Jan,

thanks a lot for your detailed explanation, like you side, I do see some timing issues with this CPU Load. looks like it's affecting on the OPC UA communication. I have OPC UA Server in Codesys and node-red has both OPC UA server and client.
the communication between Codesys and ...

hi,
In My Project , I am using RevPi connect + [32GB].
I have Node-red and Codesys running in my hardware.
My CPU is running with the load average above 6.5 all the time.
As RevPi connect+ is 4 core processor . I presume CPU load is 4.0 means CPU load is at 100%, Please do correct me if I am wrong ...

Hello Ulrich Kouatang Biakoup,

Thanks you very much for providing the detail and the link. I will implement these and get back to you if any further support required.
Few more info on this persistence variable, I have configured the Persistence Variable. Codesys_Persistence.png
1. the values are ...

Hi ,

Thanks for the sharing the details, It helped a bit. One suggestion is would nice if this info also added under the image restore and backup page as a note.

Now after executing the 'revpi-factory-reset', the device started working without the conflict on the network side[OPC UA], but the ...

hi ,

Thanks for responding to my Query, In my Project on these two devices, I have Node-red [ Client] and Codesys [ Server] on the each of these devices.
also, I have a PAS VISU Client which talks to Codesys and Node-red, I don't know where exactly the Problem is.
Is there anything needs to newly ...

Hi,

In my project I have two RevPi Connect + (32GB). I have Node-Red and Codesys running on the Hardwares. both the hardwares are in the same network.I have a OPC UA Server and Client in my project.
Since both the Applicaiton are same, I did the backup of the first hardware and flashed them on the ...

Hi,

In my Project, I am using RevPI Connect + [16 GB].
I have CodeSys Runtime in my project [Runtime Licensed]
I tried to configure the Retain and Persistence Variables in my Project, After Power-off and Power-On the Variables are not holding the previous Values.
Does Revolution PI hardware's ...

hi ,
Thanks for your response. It's not related to Network issue, because i can reach the h/w using ping command and not through Putty, Codesys as well as from the web browser.

Given this condition, can you suggest me in the method I can connect to this device for the Fresh Logic download apart ...