Hello matthewh,

have a look at the following link :

RevPi Connect Relai

Best regards
Giuseppe Pagano

Hello hteichmann,

please run following checklist.

CODESYS Checklist

Best regards
Giuseppe Pagano

Hello ivan.chonin@axbul.bg, It appears that you might not have configured the PlaceholderFilePath for "pictory" in the file /etc/CODESYSControl_User.cfg. In this case, no config.rsc is being created. Please check your configuration and make sure the PlaceholderFilePath is correctly set to ...

Hello ivan.chonin@axbul.bg,

what is the exact error message?
You could upload the log here to better understand the problem.

when you create an SOS report the logs are saved in the sos_report. you can post them here.
Revolution Pi SOS Report


Best regards
Giuseppe Pagano

Hello Philemon Benner, I am having an issue with multiple RevPi Compact devices for quite some time now. The RevPi's crash after some time, sometimes after a day / month or even hours after startup, it's not possible to ssh into the pi neither ip scan's seem to see the pi in the network, but the dev...

Hallo Ingo,

welche Geräte verwendest Du?
Ich gehe mal von einem RevPi DIO aus.
Evtl. könnte Dir der folgende Link weiter helfen.
Commissioning RevPi DIO | DI | DO

Best regards
Giuseppe Pagano

Hello Mike25, we can recommend only the RevPi OS installed is a Raspberry Pi module (CM3/CM4S/CM4) . You can check if this image can be installed there. If it works there, there is a high chance that it will work, but you will have to reinstall the packages. Please have a look at our Image Bakery: R...

Hello ivan.chonin@axbul.bg,

I think the error occurs because you have connected more than 5 devices to a single PiBridge.
You can connect 5 devices on each side.

Best regards
Giuseppe Pagano

Hello waischa,

you can use for this RevPiModIO
have a look at this link: Watchdog
On the other RevPi Connect there is a Hardware Watchdog.

Best regards
Giuseppe Pagano

Hello wilbersl,
You can use the standard Linux tools, e.g. Best regards
Giuseppe Pagano