I tried the command cat /sys/class/net/eth0/address and cat /sys/class/net/eth1/address on a Flat 8 GB running Debian 9 'Stetch', on a Connect+ running Debian 10 'Buster' and on a Connect S running Debian 10 'Buster'. On all of these devices are the the outputs from the cat command the same same as ...

The MAC addresses on the front of the module cover is C8:3E:A7:10:DC:C4 and C8:3E:A7:10:DC:C5. The output from the revpi-device-info command matches the first of the MAC addresses which is normal since I have put the Ethernet cable in Ethernet port A. The output from the revpi-config status var-log....

Here is the output you requested Nicolai: pi@RevPi107258:~/src/loggerd $ cat /etc/revpi/image-release 2023-07-28-revpi-bullseye-arm64.img pi@RevPi107258:~/src/loggerd $ revpi-device-info ------------------------------------------------------------ Product --------------------------------------------...

Our company bought a Connect 4 module for me to verify it with our measurement logger applikation. During my preparation and configuration of it have I found several issues that caused extra work compared to modules based on Stretch and Buster. I upgraded the Linux distribution with sudo apt update ...

The other thrad were absolutely no help to me with the Flat module. Today I noticed that piSerial -s, piSerial -h and piSerial -p all give the output 'getSerNum() failed -3'. I interpret this to mean that some internal configuration in the module is corrupted. Is there some way to reset this informa...

Hello Today I noticed that sudo apt update returns the following error on a Flat module and a Connect+ module both based on Debian 9 ("stretch"): Hit:1 http://repository.teamviewer.com/deb stable InRelease Ign:2 http://raspbian.raspberrypi.org/raspbian stretch InRelease Hit:3 http://archiv...

Hi I tried to enter admin as the user name and then click on the link Reset Password to Default . The web page was updated to say that the password was reset. I then tried to logon to the Flat module using the user name admin and the password printed on the side sticker. I still got the message &quo...

We have installed a Kunbus module model Flat at a customer site with wired communication. The IT security department of the customer have complained that TeamViewerwas active on our modules without us having notified them about it. I logged on to the web on the other 9 modules of model Connect+ and ...

We successfully persuaded our customer's IT department to also open TCP port 41080 in addition to TCP port 80. I was a bit nervous since my supervisor isn't fond of any additional changes that have to be made to our logger platforms (Kunbus RevPi Connect+ and Flat) to be able to deploy them because ...

I am curious. What advantage do you gain if you change the ssh password which is protected by encryption at login time if you set the web UI password to the same value since the web login is done unencrypted in clear text? I understand that you can set two different password for ssh and web UI but t...