Same problem here! I try to add these "new" node to my actual configuration without success. When I install the package, I can not start node-red as susual. I'have to re-install node-red following the instructions for RasPi. Doing a "dummy" installation is not acceptable for me. ...

Hi Kaven Wong, you can copy the PiCtory configuration. Have a look here: https://revolution.kunbus.de/forum/view ... 3952#p3952

Nice to Know Dirk!

This method will clone all the virtual configurations (like Modbus, etc?)

Thanks!

Hi David_GT, short answer: Yes, you can switch from i.e. Core 3 to Connect. The easiest way is to delete the file "/home/pi/.revpi-factory-reset" before you write the image. Then you are promptet on first login to provide Serial, MAC and which device. After a reboot you are ready to run. ...

Attached 2 screenshots, one from PiCtory, and the other one of the piTest -d.

Test done; It seems that all is working fine (my node-red program runs fine). I can expand the memory from the 4GB of the img that I had from a Core3 to the 16GB of the Connect+ with the raspi-config function. But I have some problems with piTest -d and Pictory. My initial configuration was a Core 3...

Dear colleagues;

There is any functional problem to flash a RevPi Connect+ with the image file from a RevPi Core 3?

I have a project running fine with the Core 3 and I would like to test it with the Connect+ due the expanded functions (RS485 port and the ETH port B).

Thanks in advance!

Hi David,

Is there free trial for the usage of IBM Watson?

Yes!

Hi David, Yes i am indeed working with the PNOZmulti from PILZ. Thank you so much for your help. Also i would like to know if you have any idea to use this modbus data's and sending it to the azure cloud. Do you have any details on this? I am currently using NODE-RED as there are the Azure nodes in...

I seems you are working with a PNOZmulti from Pilz. I do the same several weeks ago. Here you have some information related to that communication: In PiCtory you need to define the slave properties (PNOZmulti): slave_IP_adress slave_TCP_port In PNOZmulti the port is fix to 502 Now you need to define...

Thanks for your reply Dirk;

I adjust priorities from Wlan0 and eth0 to the same and then I can connect trough WLAN to Internet and VNC Server.