RevPi Gate EtherCAT - Slave
Expansion module for EtherCAT networks
In stock
Ready for dispatch: 1 - 2 working days (Mon-Fri)
Item no.
100073
The RevPi Gate EtherCAT integrates the Revolution Pi system into an existing EtherCAT network. The EtherCAT gateway is connected to the respective base module via the overhead system connector.
Please note the following instructions:
- This module is the Slave variant and not a Master module! If you are not familiar with industrial network protocols, please check with us beforehand to determine if such a module is suitable for your purposes.
- The gateway is incompatible with RevPi Connect 4, RevPi Connect SE, and RevPi Core SE.
- Please note that for each RevPi Gate, you will need a jumper to connect it to your Revolution Pi system, which is not included in the delivery. Additionally, please order the PiBridge plug separately.
| Product type | Gateway |
|---|---|
| Protocol | EtherCAT |
| Version | Slave |
| compatible with | RevPi Connect 5, RevPi Connect S, RevPi Connect+, RevPi Core S, RevPi Core 3+, RevPi Core 3 |
| Bus connector | 2 x RJ45 |
| Max. baud rate | 100 Mbit/s |
| I/O-Data | 512 Bytes IN/OUT |
| Power supply | 24 V DC |
| IP code | IP20 |
| EAN | 4260498390083 |
| WEEE-Reg.-No.: | DE 34461592 |