RevPi Gate EtherNet/IP - Adapter
Expansion module for Ethernet/IP networks
In stock
Ready for dispatch: 1 - 2 working days (Mon-Fri)
Item no.
100066
The RevPi Gate EtherNet/IP integrates the Revolution Pi system into an existing EtherNet/IP network. The EtherNet/IP gateway is connected to the respective base module via the overhead system connector.
Please note the following instructions:
- This module is the Adapter (Slave) variant and not a Scanner (Master) module! If you are not familiar with industrial network protocols, please check with us beforehand to determine if such a module is suitable for your purposes.
- EtherNet/IP gateway module is solely compatible with the ethernet based fieldbus protocol EtherNet/IP. Please don't mistake EtherNet/IP protocol with TCP/IP protocol!
- The gateway is incompatible with RevPi Connect 4, RevPi Connect SE, and RevPi Core SE.
- Please note that for each RevPi Gate, you will need a jumper to connect it to your Revolution Pi system, which is not included in the delivery. Additionally, please order the PiBridge plug separately.
| Product type | Gateway |
|---|---|
| Protocol | Ethernet/IP |
| Version | Adapter (Slave) |
| compatible with | RevPi Connect 5, RevPi Connect S, RevPi Connect+, RevPi Core S, RevPi Core 3+, RevPi Core 3 |
| Bus connector | 2x RJ45 |
| Max. baud rate | 100 Mbit/s |
| I/O-Data | 512 Bytes IN/OUT |
| Power supply | 24 V DC |
| IP code | IP20 |
| EAN | 4260498390069 |
| WEEE-Reg.-No.: | DE 34461592 |