Status LEDs RevPi AIO - Industrial Raspberry Pi

RevPi AIO has 3 status LEDs. The signals have the following meaning:

LED	Signal	Meaning
Power	on, green	A connection to RevPi Core has been established.
	flashes, red	A connection to RevPi Core has not yet been established (initialisation phase).
	on, red	The connection to RevPi Core has been interrupted. Check to see if PiBridge has been plugged in properly.
Out	off	A connection to RevPi Core has not yet been established (initialisation phase).
	on, green	Outputs are ready for use.
	flashes, red	Range error. The RevPi Core values are too high or too low.
	on, red	Another fault. Check the output status in the process image.
In	off	A connection to RevPi Core has not yet been established (initialisation phase).
	on, green	Inputs are ready for use.
	flashes, red	Range error. A too high a voltage or too high a power supply at one or more inputs. Check the input status in the process image.