Page 1 of 1
Using the RevolutionPi OS lite image on a RPi 4B
Posted: 07 May 2025, 18:27
by Halindrome
I know this is going to sound a little crazy, but we are doing prototyping and don't have a spare RevPi Connect sitting around. Is there a way to run the standard -lite version of the OS on a regular RPi with the understanding that a bunch of the devices etc. just are not going to be available?
Re: Using the RevolutionPi OS lite image on a RPi 4B
Posted: 08 May 2025, 14:35
by nicolaiB
Technically this should be possible.
Nicolai
Re: Using the RevolutionPi OS lite image on a RPi 4B
Posted: 08 May 2025, 19:35
by Halindrome
Okay! I did try just booting the image. It says the firmware is not available. I assume that I would want to add the correct firmware to the /boot partition or something...