ErrorCode:8193, Write to config.rsc failed!
Posted: 12 Jan 2024, 08:19
Hello,
I have the following system:
CODESYS V3.5 SP19 Patch4
CODESYS Control for Raspberry PI 4.10.0.0
Revolution Pi Library for CODESYS 1.4.1.0
RevPi Connect S
Connect Can Modul
I followed this guide to create my first project:
https://revolutionpi.de/tutorials/quick-start-2
According to the instructions, my device is discovered on the network, and I can also log in. However, I encounter errors in the process:
SysFile: Access denied to '/etc/revpi/config.rsc' due to ForceIecFilePath
IoDrvRevPiBridge: ErrorCode: 8193, Write to config.rsc failed!
I have configured my components in PiCtory.
I have already tried the following proposed solution, but unfortunately, it did not help:
viewtopic.php?t=3999
When I go into online mode and right-click on my RevPi Connect, then click on "Scan for Devices," only "piBridgeRight" appears in the list. Shouldn't the "Connect Can" module also appear there?
What could be the problem? Please help, thank you in advance!
Best regards,
Stefan
I have the following system:
CODESYS V3.5 SP19 Patch4
CODESYS Control for Raspberry PI 4.10.0.0
Revolution Pi Library for CODESYS 1.4.1.0
RevPi Connect S
Connect Can Modul
I followed this guide to create my first project:
https://revolutionpi.de/tutorials/quick-start-2
According to the instructions, my device is discovered on the network, and I can also log in. However, I encounter errors in the process:
SysFile: Access denied to '/etc/revpi/config.rsc' due to ForceIecFilePath
IoDrvRevPiBridge: ErrorCode: 8193, Write to config.rsc failed!
I have configured my components in PiCtory.
I have already tried the following proposed solution, but unfortunately, it did not help:
viewtopic.php?t=3999
When I go into online mode and right-click on my RevPi Connect, then click on "Scan for Devices," only "piBridgeRight" appears in the list. Shouldn't the "Connect Can" module also appear there?
What could be the problem? Please help, thank you in advance!
Best regards,
Stefan