The Industrial Raspberry Pi Forum

Hi,

2560x1600 monitor does not work with RevPi core (CM4S).
I made the settings as instructed by the manufacturer, but it does not work.

I was able to work with RevPi compact.
Are there any possible causes, such as RevPi core's own settings?
I would like to know the cause and solution.


The settings followed the instructions in the link.
https://www.waveshare.com/wiki/9inch_2560x1600_Monitor

Murakami

Hello murakami2503,

Have a look at the link below:
https://www.raspberrypi.com/documentati ... g_txt.html

You can see how to set the HDMI mode to your preferred resolution.

Best regards
Giuseppe Pagano