RevPi communicates with Siemens PLC via S7

Purecade · Post by **Purecade** » 17 Nov 2022, 02:39

Hello,

Does RevPi support S7 protocol and communicate with Siemens PLC?

Best regards,
Cade

Post by **giuseppe** » 17 Nov 2022, 11:42

Hello Cade,

The Siemens s7 is available in different variants. Is there a specific protocol you are referring to?

We have this gateway available.
KUNBUS Modular Gateway

: Modulare Gateway for industrial networks.png (122.1 KiB) Viewed 953 times

Note: All GW are slave modules

Additional information:
Modular Gateway FAQ
RevolutionPi Gateway Tutorial

Best regards
Giuseppe Pagano

Purecade · Post by **Purecade** » 19 Nov 2022, 05:23

Giuseppe wrote: ↑17 Nov 2022, 11:42 Hello Cade,

The Siemens s7 is available in different variants. Is there a specific protocol you are referring to?

We have this gateway available.
KUNBUS Modular Gateway
Modulare Gateway for industrial networks.png

Note: All GW are slave modules

Additional information:
Modular Gateway FAQ
RevolutionPi Gateway Tutorial

Best regards
Giuseppe Pagano

Hello,

we need to combine these gateway modules to be able to communicate with Siemens PLC via S7 protocol?

Best regards,
Cade

Post by **giuseppe** » 23 Nov 2022, 09:32

Hello Cade,

we need to combine these gateway modules to be able to communicate with Siemens PLC via S7 protocol?

The S7 protocol can run on Profibus. But this should be checked again beforehand.

In the following link, you will find how to use the Modular GW.
https://kunbus-gmbh.atlassian.net/servi ... 2843508848
there are also some tutorials linked.

Best regards
Giuseppe Pagano