The Industrial Raspberry Pi Forum

Hi.

I have a problem connecting my windows 11 PC to the RevPi Connect micro-USB.
My computer makes a sound when connecting, but nothing more. The RespberryPi Image program cant find the drive.
Windisk 32 can't find anything. I cant see that the Device manager is detecting anything under Universal Serial Bus section.

I have tried doing it the way that Dirk shows in his Image video. Also being carefull with the order.

I have tried updating the drivers and windows.
I have tried several USB ports, and tried with another PC, with windows 7...

Any clue as to whats wrong?

Best regards
Steffen

Hello Steffen,
what message is displayed in the rpiboot console?
Was the device detected correctly?

Hi Giuseppe.

I tried with another newer computer with new rpiboot and I got it to work.
I reinstalled the rpiboot on the original computer but had some issues. But a restart of the computer it seems to work.

Thanks for the help any way!

Best regards
Steffen

Hi!

I have a problem connecting my windows 11 PC to the RevPi Connect micro-USB.

I tryed it with two differen windows PC's and also with a Resperry PI.
The situation is always the same. I get this massege in the rpiboot.exe
RPIBOOT: build-date Dec 16 2022 version 20221215~105525 1afa26c5
Waiting for BCM2835/6/7/2711...

and Nothing happen.

I also tryed a different revolution Pi with the same result.

Could you please try another (good quality) USB cable? Also try an USB port without any hub or other devices if possible.

Nicolai

I allready tried a different USB cable and two different Windows PC (both Win 11) and a Raspberry PI (64Bit).

How does your process look like (esp. power sequence)? It's important to connect the USB cable BEFORE connecting the power supply.

Nicolai

Hi!

I tried four different micro usb cables and the last one worked.

Thank you!