Verbindungsprobleme RevPi connect + mit Codesys

Post Reply
KMT
Posts: 2
Joined: 20 Apr 2022, 10:15
Answers: 0

Verbindungsprobleme RevPi connect + mit Codesys

Post by KMT »

Guten liebe Leute,

ich arbeite auf einem Project mit Codesys und Revpi Connect+. Ich habe ein Problem seit einer Weile, also die Verbindung zwischen mein PC(darf kein Internet haben wegen Administrator Recht) und mein Revpi Connect + von Kunbus klappt nicht. Wenn ich LAN Kabel auf beiden einschließe, lässt sie die IP Adresse Adresse des Raspys auf PC sehen ( Tools-Raspy update-Scan). Aber wenn ich Runtime Package installieren möchte kommen einen Fehler, wie sie auf dem Bild sehen können. Ich habe auch mit Licenz Manager gesucht, kann man auch kein Raspy sehen. Und jetzt weiß ich nicht, wo das Problem liegen kann. Ich weiß nicht ob es hat zu tun mit Network Interfaces( Bei mir ist leer, es gibt dort nix geschrieben).

Danke für Ihre Aufmerksamkeit und ich freue mich auf Ihre Rückmeldungen.
kmt
Attachments
UpdateRasp&Log aussehen.jpg
UpdateRasp&Log aussehen.jpg (473.34 KiB) Viewed 4074 times
Raspy_lässt-sich_nicht_einschalt.jpg
Raspy_lässt-sich_nicht_einschalt.jpg (482.36 KiB) Viewed 4074 times
Installation_Codesys_Runtimepack.jpg
Installation_Codesys_Runtimepack.jpg (477.9 KiB) Viewed 4074 times
u.biakoup
KUNBUS
Posts: 182
Joined: 14 Apr 2022, 13:04
Answers: 2

Re: Verbindungsprobleme RevPi connect + mit Codesys

Post by u.biakoup »

Hello,
please make sure that the new Codesys Runtime V3.5 SP18 is not compatible with the Revolution Pi Library for Codesys (version 1.1.0.0). Our team is currently working on this issue. An earlier version like CODESYS 3.5 SP17 (64 Bit) must be suitable. If you are using Codesys Runtime V3.5 SP18, you need to go back to V3.5 SP17.

Please follow the step exactly like it’s mentioned here:https://revolutionpi.de/tutorials/quick-start-2/

What I can also recommand are the following steps : There may be a problem with the user management.

Reinstall the Codesys runtime environment on RevolutionPi Connect : -->https://revolutionpi.com/tutorials/code ... rect=en_US

Check the configured gateway in the Devices->Communication Settings tab.

Click Scan Network and select the RevPi Codesys device found and click the OK button.

The first time you log in, you will be asked again to configure username and password.

Then try to go online again.

Please use this link to download this component:

CODESYS Control for Raspberry Pi MC SL 4.2.0.0 https://store.codesys.com/codesys-contr ... mc-sl.html

For further questions, please feel free to contact us.
Kind regard
KMT
Posts: 2
Joined: 20 Apr 2022, 10:15
Answers: 0

Re: Verbindungsprobleme RevPi connect + mit Codesys

Post by KMT »

Vielen dank für Ihre Rückmeldung.
Alle diese Schritte, dass Sie empfohlen haben, habe ich gemacht.
1- Wenn ich auf Scan Network click, sehe ich kein Revpi Devise. Aber die IP-Adresse von Revpi kann ich sehen ( Tools-update raspy-scan). Die Lizenz ist natürlich installiert
2- Wenn ich auf Configure Runtime click, habe ich kein Zugang auf Muticore, aber meine Lizenz Codesys Control for Raspberry Pi MC SL sollte auch mit Multicore arbeiten können

Freundliche Grüße
Attachments
ConfigureRuntime (1).jpg
ConfigureRuntime (1).jpg (487.53 KiB) Viewed 3762 times
Amar
KUNBUS
Posts: 157
Joined: 15 Jul 2019, 12:58
Answers: 4

Re: Verbindungsprobleme RevPi connect + mit Codesys

Post by Amar »

verify the settings in /etc/CODESYSControl_User.cfg
It should be Architecture=armv7l

for Multicore:
[CmpRasPi]
Architecture=armv7l

for Multicore:
[CmpRasPi]
Architecture=armv6l

Reference:
https://forge.codesys.com/forge/talk/De ... 690314183/


restart codesyscontrol
sudo /etc/init.d/codesyscontrol restart

Check if codesyscontrol is running
sudo /etc/init.d/codesyscontrol status

Check codesyscontrol log
/tmp/codesyscontrol.log

Regards
KUNBUS
Post Reply