Hi Marco,

ttyUSB0 is connected to the bluetooth device.

Best Regards,
Philipp

Hi EcoMan, I would not recommend to install a RevPi without our kernel-package. You can disable piControl. Just remove "piControl" from /etc/modules. To create an custom image you can use the imagebakery: https://github.com/RevolutionPi/imagebakery It will install many things you might not...

Hi Nick, the serial number is not getting validated at any point. You can enter what ever you like. If you flash any of our devices you need to configure the device: - device type - Serial number - mac address This is not a step to verify that you have a valid device, it is just that we have current...

It's the same for the DIO.

Hi Boris, just for clarification. We never had a Jessie image for the RevPi Flat! I think you meant Stretch. The Stretch image for the RevPi Flat is not the same as the image you can download. We needed to make some changes to the image which are not compatible with our other devices. With our Buste...

Hi Torpi, sorry even that can not be guaranteed. The piControl kernel module will read the process image in a loop. You will have a race condition with the piControl reading the values and your application writing the values. It might work most of the time, but it can not be guaranteed that the firs...

Hi Tropi,

the PiBridge can't support low latencies. As all RevPi modules use the PiBridge they will never give you latencies of 5ms or below.

Best Regards,
Philipp

Hi Simon,

could you please create a new thread for your problem? As you upgrade from Stretch to Buster it is a different issue.

Best Regards,
Philipp

Hi mlove,

this is no problem. It just tells you that the overlay is already applied. So nothing to worry about.

Best Regards,
Philipp

Hi Christian,

I don't think they are connected. The missing cycle issue is related to the digital I/Os. The analog I/Os are sampled not as fast. We didn't see the missing cycle related to these.

Best Regards
Philipp