Hello Giuseppe,

thanks for the info. Please update me when the bug gets fixed.

Best regards.

Hello Ulrich, thank you for your response. I will try to explain my problem in details. I am using RevPi Connect S model with CODESYS Control for Raspberry Pi SL. In my program code, I oscillate bit4 every 1 second and bit7 every 8 seconds (LED A3 green and Watchdog as described here: LED A3 green) ...

Hello, I came across a problem when writing to a RevPiLED register from Codesys. For example, when I set the Bit3 and Bit7, the piTest reads value 1 on RevPiLED register, also the A2 LED doesn't turn red nor the WD is reset. Is there something regarding the using of the Revolution Pi Connect IO Mapp...

Hello Dirk,

I posted a question regarding this topic on Codesys Forge forum but I didn't get any answer. I hope that maybe somebody ran in the same issue using the RevPi controllers. I will certainly try to get the answer and if I solve the problem I'm posting the solution here.

Hello Dirk,

I posted a question regarding this topic on Codesys Forge forum but I didn't get any answer. I hope that maybe somebody ran in the same issue using the RevPi controllers. I will certainly try to get the answer and if I solve the problem I'm posting the solution here.

Hello,

what is a difference between Standard and Multicore CODESYS runtime? May the Standard runtime be used on the RevPi Connect S controllers? What are the limitations?

Hello,

I am trying to set up a redundant system of two RevPi Connect+ controllers, the controllers have a Modbus TCP Slave device setup.

Is it possible to synchronize the IO map of the Modbus TCP Slave on the controllers and how?

Hello, I am using two RevPi Connect+ controllers and I want to make a redundant system. For that I am using Redundancy Configuration module. When I setup everything according to the manual, PLC 1 is always in 'Simulation' redundancy state. When I try to Activate it I get an error 'Switching simulati...

Hello,

recently we bought several RevPi Connect S powered by Compute Module 4S controllers and we would like to upgrade them with CODESYS licenses. My question is, do these types of controllers have a CODESYS support?
We would like to check this before buying any licenses.

Best regards

Ran into the same problem with Raspbian Buster 10 on RevPi Connect S controller. Is there a solution?