Hi Jerome, Sure thing, let me walk you through it. The DINT data type in Revolution Pi represents a 32-bit signed integer. If you need to work with a 64-bit value, you can use a combination of two DINT values to represent it. For example, let's say your 64-bit value is represented as HighDINT and Lo...

Hello Zoroloong, thank you for contacting us and for your interest in our product. With the RevPi connect, you are on the right track to implement your system. I also recommend you to read the article below, which describes clearly and in detail how to configure the communication with Modbus RTU via...

Hallo Ramdhan Purnama,
Please have a look at the codesys checkliste to ensure a right setup.

Best Regards,

Ulrich Kouatang Biakoup | Technical Support

Dear Community, We'd like to bring an important point to your attention regarding upgrading from Buster to Bullseye. As of now, we do not provide official support for this upgrade process. There are several critical steps involved, and if not executed correctly, it can lead to issues such as network...

Dear eth, Thanks for the detailed report. From your log files I can see lots of error on the backplane bus (piControl). Please check the following steps. - Check if all PiBridge connectors are connected tighly - Disable all unnecessary services / applications as the Connect is a avery resource restr...

Guten Tag Duc900,

ich habe ein schöner Artikel für dich. Schau mal darauf. Ich denke, dass somit wird alle deiner Fragen sich beantworten.

Mit freundlichen Grüßen,

Ulrich Kouatang Biakoup | Technischer Support

Hallo Duc900, Guten Abend, noch eine Ergänzung. Ich habe das Original-Image nochmal eingespielt, und jetzt ist die web-Seite erreichbar. DA wundert mich, dass logi.CAD nicht als Service eingestellt werden kann. Ich habe die Lizenz gekauft. Ist logi.CAD automatisch Teil der SW? Ja logi.CAD ist nicht ...

Guten Abend Duc900, die statische IP-Adresse lässt sich einfach mit dem Tools "nmtui" einstellen. Starten Sie 'nmtui': Geben Sie den folgenden Befehl in Ihrem Terminal ein und drücken Sie 'Enter': sudo nmtui Navigieren Sie zum Punkt 'Edit a connection': Verwenden Sie die Pfeiltasten, um &q...

Hello RobD,
Have a look here to troubleshoot the issue.
Best Regards,

Ulrich Kouatang Biakoup | Technical Support

Hello Limpopo, Thank you, for sharing your inquiry here. 1. It is not possible to decrease the RevPiIOCycle value manually. 2. I always get this warning when run the Python script, maybe you have an idea how to fix that. /usr/lib/python3/dist-packages/revpimodio2/helper.py:622: RuntimeWarning: io re...