Should produce the same results as the packages are already published to our repositories.

Nicolai

Liebe Community, wir freuen uns, die neuen Bullseye Image 04/2024 ankündigen zu können. Ihr findet die Images (normal und lite, jeweils als 32-bit oder 64-bit Version) wie gewohnt in unserem Downloadbereich ( https://revolutionpi.com/de/tutorials/downloads#revpiimages ): - RevPi Bullseye 64-bit (ID:...

Dear Community, we are pleased to announce today's release of Bullseye Image 04/2024. You can get the images (normal and lite, each as 32-bit or 64-bit version) as usual in our download area (https://revolutionpi.com/tutorials/downloads/#revpiimages): - RevPi Bullseye 64-bit (ID: 7979) - RevPi Bulls...

# Enable I2C dtparam=i2c1=on dtparam=i2c_arm=on [...] # Enable UART enable_uart=1 These are also not needed or might interfere with our custom overlay. The messages you see are debug messages and are not shown in productive builds. Our debian package is built with `-Wall -pedantic -DNDEBUG -fPIE`, ...

004320.690: brfs: File read: 3913 bytes 004325.566: brfs: File read: /mfs/sd/overlays/revpi-connect-se.dtbo 004398.016: Loaded overlay 'revpi-connect-se' 004783.335: brfs: File read: 5816 bytes 004802.426: brfs: File read: /mfs/sd/overlays/revpi-dt-blob.dtbo [...] 005084.211: brfs: File read: /mfs/...

I can also see from the SOS report you provided, that the /boot/config.txt contains custom parameters which might interfer with our overlays. Please remove them and check if it will make any difference:

enable_uart=1
dtparam=i2c_arm=on

Nicolai

Hallo Andras, das ist tatsächlich ein Bug in der automatischen Erkennung der Modbus Geräte. Ich habe bereits einen Fix erstellt und dieser wird mit einer der nächsten Pictory Updates verteilt werden: https://gitlab.com/revolutionpi/pictory/-/merge_requests/133 Du kannst aber die Modbus Geräte auch j...

Thanks for the investigation! We will look into this. If you can provide an image of your system this would be great. Please contact me via private message for details where to send the image to.

Nicolai

Hallo Markus,

das AIO kann nicht mit Typ K Sensoren betrieben werden, sondern nur wie du schon schriebst mit PT100/PT1000. Falls du diese nutzen willst, brauchst du externe Messwertumformer nach 0-10V / 0-24 mA.

Gruß Nicolai

You cannot use ` rpi-update` as it will install the stock Raspberry Pi kernel over our kernel. With this the kernel driver vor piControl won't work. The bootloader firmware is part of the package `raspberrypi-bootloader`. Please check the version, it should look like this: Desired=Unknown/Install/Re...