The RevPi Compact is an open source compact controller based on the Raspberry Pi. Equipped with the Raspberry Pi Compute Module 3+, the control system has a quad-core processor with 1.2 GHz, 1 GB RAM and 8 GB eMMC flash memory. The open platform concept (including full root rights) allows the user maximum freedom of design when implementing his projects. To connect sensors and actuators, the RevPi Compact is equipped with eight digital and analog inputs as well as eight digital and two analog outputs. Two Ethernet interfaces (each with its own MAC address) enable the device to be integrated simultaneously in two different networks. The device also has a 4-pole RS485 interface with screw terminals.
The low profile design allows the device to be installed in sub-distribution systems, which are commonly found in building automation. The operating system used is an adapted Raspbian with a real-time patch. Individual applications can be programmed via Node-RED, Python or directly in C. The popular industrial protocols Modbus RTU and Modbus TCP are supported as standard. Those who do not want to program themselves can optionally use professional soft PLC and SCADA software for control and visualization.
Large number of I/O interfaces integrated
Contrary to the standard Revolution Pi design, the RevPi Compact is not modular. In order to meet most common application requirements, the RevPi Compact is equipped with a large number of digital and analog inputs and outputs. The device has eight digital inputs and 8 digital outputs. For analog sensors or actuators, the device is also equipped with 8 analog inputs (0 – 10 V) and 2 analog outputs (0 – 10 V). The inputs and outputs can be wired via screw terminals located on the top or bottom of the instrument.
Simultaneous operation in two networks
The two separate Ethernet interfaces of the RevPi Compact allow the device to be integrated into two different networks at the same time. For example, sensor data from the OT network can be transferred from the shop floor to the RevPi Compact via Modbus TCP and sent further into the cloud or a higher-level IT system using MQTT or OPC UA.
Open source
With this modified kernel, the scheduler that controls the execution of tasks by the operating system can be extensively configured to avoid the delays usually caused by network and other I/O accesses. Suitable drivers for the expansion modules are of course already pre-installed.
Modbus capabilities
The RevPi Compact already has master and slave capability for the popular network protocols Modbus RTU and Modbus TCP. Modbus TCP works with the RevPi Compact’s existing Ethernet interfaces (i.e. via the RJ45 sockets on the front panel) or any other added Ethernet connection (e.g. USB WLAN adapter) that provides the TCP/IP protocol. Modbus RTU can be implemented via the 4-pin RS485 connector. The master and slave configuration is controlled by our browser-based, graphical configuration software PiCtory.
Node-RED
The pre-installed open source software Node-RED is an excellent tool for the realisation of simple automation tasks and rapid prototyping.
Real industrial suitability
One of our key goals was to give the Raspberry Pi real industrial capability to turn it into a true compact control system. That`s why the DIN rail housing of the RevPi Compact is fitted with robust 24 V industrial hardware that complies with the EN 61131-2 standard.
- Power supply: typ. 24 V DC (10.8 … 28.8 V DC)
- Operating temperature: -20 °C …. +55 °C
- EMC interference emission according to EN 61000-6-4
- EMC immunity according to EN 61000-6-2
Interfaces |
---|
2 x RJ45 10/100 Ethernet (using separate MAC adresses) |
4 x USB A (total current draw from all sockets max. 2 A) |
1 x HDMI socket |
1 x Micro-USB (solely for image transfer to eMMC) |
1 x RS485 max. 500 kbps, termination switchable by software (not galvanically isolated) |
8 x digital Inputs Input threshold: At 24 V DC compatible to type I and III sensors according to EN 61131-2 |
8 x digital Outputs High-side with 10 k pull-down resistor, short-circuit proof (internal temperature switch-off), potential separation system/digital outputs. Maximum current load: Per output: 500 mA @ 24 V DC (resistive load!). Sum of all outputs: max. 2 A @ 24 V DC (resistive load!) |
8 x analog Inputs 0-10 V DC, single ended, 16 Bit at piControl, 21 Bit raw value, software switchable current source 2.5 mA |
2 x analog Outputs 0-10 V, short-circuit proof, protection against backfeeding, 8-bit resolution, 1 % accuracy, max. current load 10 mA (10 V DC @ 1 k) |
Specifications | |
---|---|
Processor | Broadcom BCM2837B0 with quad-core ARM Cortex-A53 |
Clock rate | 1.2 GHz |
RAM | 1 GB |
eMMC flash memory | 8 GB |
EERAM persistent memory | 2 kB |
Power supply | typ. 24 V DC (10.8 … 28.8 V DC) |
Max. power consumption | 20 W (incl. 10 W USB) |
Housing type | DIN rail housing (for DIN rail version EN 50022) |
Housing material | Polycarbonate |
Dimensions (H x W x D) | 90 x 160.6 x 58 mm |
Weight | approx. 290 g |
Protection class | IP20 |
Operating temperature | -20 °C…+55 °C |
Storage temperature | -40 °C…+85 °C |
Humidity | 93 % (non-condensing) |
EMC interference emission | according to EN 61000-6-4 |
EMC immunity | according to EN 61000-6-2 |
CE, RoHS conformity | Yes |